CHARGING THE BATTERY:
Kore 2.0 Elite is equipped with a magnetic pogo pin charging dongle.
Attach the bottom of the watch to the magnetic pogo pin charging dongle. (See diagram)
To charge, plug the dongle into a 5V2A USB-A port (not included) or a wall socket with a USB adapter. Make sure your power source is 5V2A. It might take up to 3-5 minutes for the watch to be responsive.
Allow Kore 2.0 Elite to charge for up to 2 hours or until the battery indicator on the home screen is full.
When completely charged, remove the device from the charging dongle.

TIPS FOR USE:
If the Kore 2.0 Elite screen does not light up immediately after being plugged in properly, the battery may be completely drained. Let it charge for at least 1 hour. The screen should light back up within this time. If Kore 2.0 Elite still does not light up or charge after all these steps, please contact customer support.

TO TURN ON KORE 2.0 ELITE:

• Hold down the home button to turn on the device.
• If the device cannot be turned on, it is possible that the battery might be low. Please charge it on a 5V2A rated USB power supply for up to 3-5 minutes. Please refer to the charging instruction on page 2.

TIPS FOR USE:

• Kore 2.0 Elite requires approximately 20 seconds to get a heart rate or blood oxygen reading.
• For optimal performance, it is recommended to wear Kore 2.0 Elite on your left wrist.
• To keep Kore 2.0 Elite clean, wipe it down with a damp cloth once a week or after physical activities.
• To maintain consistent sensor reading, it is recommended to clean the sensor at the back of the watch after use. Dirt, lotion, grease or excessive water and sweat may affect sensor performance.

FASTENING THE WRISTBAND:

The device’s sensors require direct skin contact on your wrist to get an accurate reading.
Hold Kore 2.0 Elite in place on the outside of your wrist.
Tighten the wristband until you feel it has a snug fit around your wrist, but not so tight that it cuts off circulation, then fasten the pin-and-tuck strap.
To remove the device, unpin the tuck strap.

INSTALLING THE KOREHEALTH APP:

• Download the KoreHealth App onto your Apple iOS or Android smartphone by scanning the QR codes on the next page, or by searching "KoreHealth" in the Apple App Store or Google Play Store.
• Device requirements: Apple iOS 8.0 and above; Android 4.4 and above.

HOW TO CONNECT AND SYNC KORE 2.0 ELITE WITH THE KOREHEALTH APP:

1. Turn on Bluetooth on your phone.
2. Download the KoreHealth App to your phone. You can find it on the Apple ‎App Store and Google Play.
3. Open the App and either log in or register for an account.
4. Go to "Device" and select "Scan" to search for your Kore 2.0 Elite.
5. When the permission pop-up appears, choose "Pair."
6. Once the pairing is successful, you can go to "Settings" and customize to your needs.

USING KORE 2.0 Elite:

• Kore 2.0 Elite is equipped with a glass touch screen and capacitive Home button () located at the bottom of the screen.
• Swipe up, down, left, and right on the screen to cycle through modes.
• Short Press on screen/icon on screen to select.
• Short Press the Home button () to return to the previous screen.
• Long Press the Home button () for 3 seconds to return to the Home screen.

TIPS FOR USE:
The touch screen may be affected by conductive media such as water from showers or rain. Make sure the button interface is clean and dry when using

HOME SCREEN
The home screen displays the time, day, date, weather, health metrics data, and other essential information.
To change the home screen display style, long press the home screen for 3 seconds to open Cover Style Selection. Swipe left and right to view cover design. Short press at the end to confirm your selection.

MODES:

HEALTH METRICS DATA

Measures your daily steps, distance, calories and activity minutes. Short press Health Data to expand details.

 

WORKOUT

Measures your performance during specific exercises. Swipe up and down to select a workout (Walk, Run, Cycling, Gym, Hiking, Basketball, Soccer, Tennis, Yoga, Dance, Badminton). Select Target Setting (Distance, Duration, Calories, or Open Goal) and begin workout.

 

HEART RATE MONITOR

Measures your heart rate in beats per minute.

 

HRV

Tracks the variation in time between each heartbeat.

 

BLOOD OXYGEN MONITOR

Measures oxygen levels in your blood.

SKIN TEMPERATURE

Tracks skin temperature measurement.
Friendly Reminder
The unit of measurement can be changed from °F to °C in your App. The metal temperature sensor will need direct skin contact in order to take an accurate reading. Water, sand, or dirt between your wrist and watch will result in inaccurate readings. The skin temperature measurement can take up to 1 minute to reach a stabilized measurement.

 

SLEEP

Measures your total sleep duration. It also breaks down your sleep patterns.

 

RELAX

Set a timed goal to relax. The device will lead you in a breathing exercise.

 

TIME

Use a timer and stopwatch function.

 

NOTIFICATION

View incoming messages from your smartphone. Scroll to the left to view details. Notification alerts SMS, Facebook™, Instagram™, Twitter™, Messenger™, WhatsApp™, Telegram™, Pinterest™, Snapchat™, Gmail™, Skype™, Line™, VKClient™, QQ™, and WeChat™.

 

PHONE CALLS

View incoming calls from your smartphone. Accept (to answer calls via smartphone) or decline calls.

 

WEATHER

Displays local weather when connected to the App.

 

MUSIC

Control music from a connected smartphone.
Note: Music control will only work when your Kore 2.0 Elite is paired with a smartphone and the KoreHealth App is running that device.

 

FEATURED STATUS

Access this section by swiping right on the main screen. Adjust brightness, Raise to Wake and Do Not Disturb.

 

REMINDER

Set daily reminders to take medicine, drink water, or take a walk.

 

SETTINGS

Select setting options (Find phone, display, language restart, power off, reset or about) by tapping on desired feature. FCCID information is listed in About.

 

FACTORY RESET

In Settings you will find the RESET button. This will prompt you to restore your Kore 2.0 Elite to its factory setting which will erase any existing data and preferences.